Welcome to our Aprilaire 600M Humidifiers Page!
Aprilaire 600M Humidifier Only $136.00!
This Aprilaire 600M humidifier will ship the next business day after you order.
*The 600M requires 6 inch round pipe to connect to the return air for supply air. The 6" round duct is not furnish, but can be purchased at almost any home supply store. You would also need to purchase some 1/4" copper tubing to connect the water supply to the humidifier. We double-box all humidifier orders to protect the humidifier during shipping. The box is over-sized and rated by UPS at 29 lbs. We rate it at 25 lbs to try and save you on the shipping.
| |||
| |||
| |||
| |||
| |||
|
Please click on your browsers "<" button to return to our site after reading the PDF.
 |
1/4" copper water supply tubing at least 10'. | |
|
Plumber's Teflon tape to wrap around the threads of the water saddle valve before you screw it into the body of the saddle valve. This will prevent a leak around where the valve screws into the body. | |
|
18 gauge thermostat wire. Probably about 20'. This is supplied with the humidifier by us free. It is better to have too much than not enough. You will use this to wire between your humidistat, low voltage transformer and back to the humidifier. | |
|
Electrical-(1) outlet box with romex connectors. | |
|
#14-3 house wire. You probably will not need over 3'. I use the 14-3, sometimes to run from the furnace board (when 110 volts are provided on the furnace board) over to an outlet that is attached to the side of the furnace. You can also use the wire to run into a junction box that powers the low voltage transformer when installing the model 500 & 600 humidifiers. You must drill a hole in the blower compartment of the furnace and use a romex connector to protect the wire from being cut by the body of the furnace. I use a metal cutting hole saw to drill the hole in the body of the furnace. | |
|
3/4 PVC fittings & PVC cement: You will probably need at least 4-90's, 2-couplings and 1-tee. |
|
|||
|
We accept these credit cards:
Disclaimer: Arnold's Service Company, Inc. assumes no liability for any incidental, consequential or other liability from the use of this information. All risks and damages, incidental or otherwise, arising from the use or misuse of the information contained herein are entirely the responsibility of the user. Although careful precaution has been taken in the preparation of this website information, we assume no responsibility for omissions or errors.
We Sell Heating, Air Conditioning Parts & Supplies To You At Low Wholesale Prices!